Question 1

True or false: IMAX Technology was invented by a Japanese company in Tokyo.

Accepted Answer

False. IMAX was invented in Canada by a team including Graeme Ferguson, Roman Kroitor, and Robert Kerr, not in Japan. The first IMAX theater opened in Toronto.

Question 2

True or false: IMAX Technology film projectors use standard 35mm film reels.

Accepted Answer

False. IMAX film projectors use 70mm film, not 35mm. The larger frame size is essential for high-resolution, large-screen projection.

Question 3

True or false: IMAX Technology screens are curved to provide an immersive viewing experience.

Accepted Answer

True. IMAX screens are typically curved slightly to wrap around the audience's peripheral vision, enhancing immersion compared to flat screens.

Question 4

True or false: IMAX Technology requires all theaters to have a dome-shaped screen.

Accepted Answer

False. Only IMAX Dome (OMNIMAX) theaters have domed screens. Most IMAX theaters have flat or slightly curved screens, not domes.

Question 5

True or false: IMAX Technology screens are always perfectly flat without any curvature.

Accepted Answer

False. IMAX screens are usually curved to enhance immersion. Even digital IMAX theaters use a slight curve; flat screens are not standard for IMAX.

Question 6

True or false: IMAX Technology was originally developed by a Canadian team in the late 1960s.

Accepted Answer

True. IMAX was co-founded by Canadians Graeme Ferguson, Roman Kroitor, and Robert Kerr. The first IMAX film premiered at Expo 70 in Osaka.

Question 7

True or false: IMAX Technology uses 70mm film that runs horizontally, yielding a frame area approximately 8.3 times larger than standard 35mm film.

Accepted Answer

True. IMAX 15/70 film is 70mm stock run horizontally; each frame is 70mm x 48.5mm. Standard 35mm frames are roughly 22mm x 16mm. The area ratio is about 8.3:1.

Question 8

True or false: IMAX film projectors use a 'rolling loop' mechanism to minimize film jitter.

Accepted Answer

True. The rolling loop transport uses a loop of film and a rotating drum to advance frames smoothly, reducing jitter for stable projection of large frames.

IMAX Technology Trivia Questions